Repair stucco finish as needed using vcc approved stucco formula:stucco: base coat consists of 2 coats, doubled up work of 5/8" total thickness. Proportioned as follows: no greater than 1:12 part portland cement, to 3 parts lime, and 9 parts sand, 6 lbs./cubic yard hair or fiber, and enough water to form a workable mix. Finish coat is 1/4" in total thickness proportioned as follows: no more than 1 part portland cement, 3 parts lime, 9 parts sand, enough water to form a workable mix. Note: ratio of portland cement not to exceed 1:12. Remove deteriorated fascia boardsinstall new 7/8" fascia with " bead, as per vcc standard detail sheet no. 12 (attached). All repair/replacement work shall match existing in color, size, material, detail, profile and exposureinstall new iron, column bases to match existing on 925 chartresto prepare for painting by sanding (rotary sanders cannot be used), making minor millwork and masonry repairs as necessary to match existing conditions (masonry mix must be

Historical import type: enforcement vcc permit generaluser: hirvintracking: 86143716227status: permit issuedstatus date: 1/27/2012 12:00: amowner: rue chartres associationowner edited by: 1/27/2012 by hirvinto tuck-point the rear wall of the rear service building as necessary as follows:- the wall section measures approximatley 28 x 55- the mortar mix must be "soft" with the portland cement content not to exceed more than one part to 12

Historical import type: enforcement vcc permit generaluser: hirvintracking: 86143716227status: permit issuedstatus date: 1 27 2012 12:00: amowner: rue chartres associationowner edited by: 1 27 2012 by hirvinto tuck-point the rear wall of the rear service building as necessary as follows:- the wall section measures approximatley 28 x 55- the mortar mix must be "soft" with the portland cement content not to exceed more than one part to 12

Repair stucco finish as needed using vcc approved stucco formula:stucco: base coat consists of 2 coats, doubled up work of 5 8" total thickness. Proportioned as follows: no greater than 1:12 part portland cement, to 3 parts lime, and 9 parts sand, 6 lbs. Cubic yard hair or fiber, and enough water to form a workable mix. Finish coat is 1 4" in total thickness proportioned as follows: no more than 1 part portland cement, 3 parts lime, 9 parts sand, enough water to form a workable mix. Note: ratio of portland cement not to exceed 1:12. Remove deteriorated fascia boardsinstall new 7 8" fascia with " bead, as per vcc standard detail sheet no. 12 (attached). All repair replacement work shall match existing in color, size, material, detail, profile and exposureinstall new iron, column bases to match existing on 925 chartresto prepare for painting by sanding (rotary sanders cannot be used), making minor millwork and masonry repairs as necessary to match existing conditions (masonry mix must be