Content | Date | Cost | Contractor Rank | Address | Contractor |
---|---|---|---|---|---|
Install 1 new freestanding atm kiosk Date: September 30, 2013 Client: Stewart Investment Company | Applicant: Mg Permits Gary Brent | Permit type: Alteration and repai | Permit status: Permit issued | Permit id: B1311517 | |||||
Amend approved permit b1311517 to include the location of atm kiosk. Date: March 10, 2014 Client: Stewart Investment Co. | Applicant: Gary Brent | Permit type: Alteration and repai | Permit status: Permit issued | Permit id: B1404977 | |||||
Eightatv mounted drill rig and will generate an approximately 6-inch annulus. Sampling will be conducted using a 2-inch o. D., split-barrel sampler driven into the soil a distance of 18 or 24 inches by a 140-pound hammer falling inches. If the confining unit is encountered during drilling then advancement of the augers should be halted and the permanent outer casing should be set into 5 feet down to the confining unit and grouted in place using bentonite slurry. Drilling should resume through the casing and grout. Date: April 25, 2014 Client: Steuart Investment Company | Applicant: Ecs Mid-Atlantic, Llc | Permit type: Miscellaneous | Permit status: Permit issued | Permit id: Sb1400250 | |||||
SCORE 93 Eightatv mounted drill rig and will generate an approximately 6-inch annulus. Sampling will be conducted using a 2-inch o. D., split-barrel sampler driven into the soil a distance of 18 or 24 inches by a 140-pound hammer falling inches. If the confining unit is encountered during drilling then advancement of the augers should be halted and the permanent outer casing should be set into 5 feet down to the confining unit and grouted in place using bentonite slurry. Drilling should resume through the casing and grout. Date: April 25, 2014 Contractor: Ecs Midatlantic Llc Client: Steuart Investment Company | Permit type: Miscellaneous | Permit status: Permit issued | Permit id: Sb1400250 | |||||
SCORE 79 Install 1 new freestanding atm kiosk Date: September 30, 2013 Contractor: Mg Permits Gary Brent Client: Stewart Investment Company | Permit type: Alteration and repair | Permit status: Permit issued | Permit id: B1311517 | |||||
SCORE 88 Amend approved permit b1311517 to include the location of atm kiosk. Date: March 10, 2014 Contractor: Gary Brent Client: Stewart Investment Co. | Permit type: Alteration and repair | Permit status: Permit issued | Permit id: B1404977 | |||||
SCORE 89 Eightatv mounted drill rig and will generate an approximately 6-inch annulus. Sampling will be conducted using a 2-inch o. D., split-barrel sampler driven into the soil a distance of 18 or 24 inches by a 140-pound hammer falling inches. If the confining unit is encountered during drilling then advancement of the augers should be halted and the permanent outer casing should be set into 5 feet down to the confining unit and grouted in place using bentonite slurry. Drilling should resume through the casing and grout. Date: April 25, 2014 Contractor: Ecs Midatlantic, Llc Client: Steuart Investment Company | Permit type: Miscellaneous | Permit status: Permit issued | Permit id: Sb1400250 |