Install wire, lath to exterior brick wall and apply 2 coats stucco. Jasper street side of building. Stucco_-_exterior plaster. Installation of these materials shall be in compliance with astmc926 and astmc1063 and the provisions of this code. R703. 6. 1 lath. All lath and lath attachments shall be of corrosion- resistant materials. Expanded metal or woven wire lath shall be attached with 1-1 2-inch-long (38 mm), 11 gage nails having a 7 16-inch (11. 1 mm) head, or 7 8-inch-long (22. 2 mm), 16 gage staples, spaced at no more than 6 inches (152 mm), or as otherwise approved. Contact streets department for dumpster permit and footway closure permits. Contact inspector at district office for wall inspection prior to starting work.

Interior construction of new elevator shaft and pit, basement thru 5th floors, new framing and alterations supports to exsiting structural framing, trusses and floor openings for new 2 hour fire rated shaft constrution and pit, new elevator machine room, fire rated barriers and rated openings - as per structural engineers report and assessment and desginers plans. No co review made. Owner responsible for certificates of occupancies, use permits and fire-life safety, accessible code requirements for 1st thru vacant floors & new uses listed prior to any occupancy. Cos required prior to occupancy. No cos on file. Additional permits and code review will be required for occupancies.

Replace existing 2 windows & 1 door

Install 400amp service,400amp disconnect for elevator,20amp bfci and 2-lights in elevator shaft as per 2008 nec (north district)

Install 8 lights outside the building per 2008 nec (commerical)north district