MICHAEL YASEK

2308 Pomeroy Road Se Washington Dc
One boring shall be drilled on the sidewalk of erie street se infront of 1501 erie street se. A sidewalk closure will be required at this location. The second boring will be drilled in the grass area behind the curb and gutter across the street from 1501 erie street se. The boring on the curb will require a partial lane closure. For the borings a single truck drill rig (9 x 20) will be used. Boring test holes will be 6" in diameter to a depth of approximately feet below the grass/sidewalk. A miss utility locator will be used prior to the start of work. The boring will be backfilled and patched in accordance with ddoe requirements. A traffic control plan has been included. Total work duration of two days. This construction permit requires a separate occupancy permit. The attached plans and conditions are a part of this permit. If steel plates are used at this job site additional permit is needed.

2606 Firth Sterling Avenue Se Washington Dc
4 test borings to be performed within right hand eastbound lane of firth sterling avenue, se from approximately i-295 underpass to intersection with barry road, se. One boring in firth sterling avenue frontage road, se east bound lane near interection of eaton road, se. Single truck drill rig ( x 30) will be used. Boring test hole will be 6" in diameter to a depth of ten feet. Miss utility and private utility locator to be used prior to work start. All borings will be backfilled and patched with an equal or greater thickenss of asphalt. Single lane closure, sidewalks to remain open/clear. Flaggers to be used for all work. Total work duration one to two days.

2308 Pomeroy Road Se Washington Dc
One boring shall be drilled on the sidewalk of erie street se infront of 1501 erie street se. A sidewalk closure will be required at this location. The second boring will be drilled in the grass area behind the curb and gutter across the street from 1501 erie street se. The boring on the curb will require a partial lane closure. For the borings a single truck drill rig (9 x 20) will be used. Boring test holes will be 6" in diameter to a depth of approximately feet below the grass sidewalk. A miss utility locator will be used prior to the start of work. The boring will be backfilled and patched in accordance with ddoe requirements. A traffic control plan has been included. Total work duration of two days. This construction permit requires a separate occupancy permit. The attached plans and conditions are a part of this permit. If steel plates are used at this job site additional permit is needed.

2606 Firth Sterling Avenue Se Washington Dc
4 test borings to be performed within right hand eastbound lane of firth sterling avenue, se from approximately i-295 underpass to intersection with barry road, se. One boring in firth sterling avenue frontage road, se east bound lane near interection of eaton road, se. Single truck drill rig ( x 30) will be used. Boring test hole will be 6" in diameter to a depth of ten feet. Miss utility and private utility locator to be used prior to work start. All borings will be backfilled and patched with an equal or greater thickenss of asphalt. Single lane closure, sidewalks to remain open clear. Flaggers to be used for all work. Total work duration one to two days.

2613 Bladensburg Rd Ne, Washington, Dc 20018
Three 50-foot geotechnical spt soil borings will be performed with an auger drilling rig utilizing continuous flight hollow stem augers, creating approximately 6-inch diameter boreholes.

2606 Firth Sterling Avenue Se Washington Dc
Excavation; boring test pit (single), excavation; boring test pit (each addl)

2308 Pomeroy Road Se Washington Dc
Excavation; boring test pit (each addl), excavation; boring test pit (single)

2 M St Se, Washington, Dc 20003
Five 70-foot geotechnical spt soil borings will be performed with an auger drilling rig utilizing continuous flight hollow stem augers, creating approximately 6-inch diameter boreholes.

2308 Pomeroy Road Se Washington Dc
One boring shall be drilled on the sidewalk of erie street se infront of 1501 erie street se. A sidewalk closure will be required at this location. The second boring will be drilled in the grass area behind the curb and gutter across the street from 1501 erie street se. The boring on the curb will require a partial lane closure. For the borings a single truck drill rig (9 x 20) will be used. Boring test holes will be 6" in diameter to a depth of approximately feet below the grass sidewalk. A miss utility locator will be used prior to the start of work. The boring will be backfilled and patched in accordance with ddoe requirements. A traffic control plan has been included. Total work duration of two days. This construction permit requires a separate occupancy permit. The attached plans and conditions are a part of this permit. If steel plates are used at this job site additional permit is needed.

2308 Pomeroy Road Se Washington Dc
Excavation; boring test pit (each addl), excavation; boring test pit (single)

2606 Firth Sterling Avenue Se Washington Dc
Excavation; boring test pit (single), excavation; boring test pit (each addl)

1815 East Beach Drive Nw Washington Dc
One boring shall be performed on the west shoulder of east beach drive near across the street from the address of 1815 east beach drive nw. For the boring a single truck drill rig (9 x 20) will be used. Boring test hole will be 6" in diameter to a depth of approximately feet below the shoulder. A miss utility locator will be used prior to the start of work. The boring will be backfilled and patched in accordance with ddoe requirements. A traffic control plan has been included. Pedestrian traffic will not be impacted. Total work duration two days. This construction permit requires a separate occupancy permit. The attached plans and conditions are a part of this permit. If steel plates are used at this job site additional permit is needed.

2308 Pomeroy Road Se Washington Dc
One boring shall be drilled on the sidewalk of erie street se infront of 1501 erie street se. A sidewalk closure will be required at this location. The second boring will be drilled in the grass area behind the curb and gutter across the street from 1501 erie street se. The boring on the curb will require a partial lane closure. For the borings a single truck drill rig (9 x 20) will be used. Boring test holes will be 6" in diameter to a depth of approximately feet below the grass sidewalk. A miss utility locator will be used prior to the start of work. The boring will be backfilled and patched in accordance with ddoe requirements. A traffic control plan has been included. Total work duration of two days. This construction permit requires a separate occupancy permit. The attached plans and conditions are a part of this permit. If steel plates are used at this job site additional permit is needed.