CHRIS GIESE

South Capitol Street Sw And R Street Sw Washington Dc
Scb will perform 5 borings to the depth of feet and 2 borings to the depth of 115 feet unless refusal is encountered at shallower depths. The borings will be drilled utilizing 3. 25-inch hollow stem, continuous flight augers. Borings located in potentially contaminated areas will use cased mud-rotary methods. The borings will be performed utilizing a truck-mounted drill rig and will generate an approximately 6-inch diameter annulus. Sampling will be conducted using a 2-inch o. D., split-barrel sampler driven into the soil a distance of 18 or 24 inches by a 140-pound hammer falling inches.

Interstate 295 And South Capitol Street Washington Dc
Scb will perform 4 borings will extend to the depths of feet unless refusal is encountered at shallower depths. The borings will be drilled utilizing 3. 25-inch hollow stem, continuous flight augers. Borings located in potentially contaminated areas will use cased mud-rotary methods. The borings will be performed utilizing a truck-mounted drill rig and will generate an approximately 6-inch diameter annulus. Sampling will be conducted using a 2-inch o. D., split-barrel sampler driven into the soil a distance of 18 or 24 inches by a 140-pound hammer falling inches.

South Capitol Street Southbound And Ramp From Robbins Road Sw Eastbound Washington Dc
Scb will perform borings to the depth of feet and 2 borings to the depth 115 feet unless refusal is encountered at shallower depths. The borings will be drilled utilizing 3. 25-inch hollow stem, continuous flight augers. Borings located in potentially contaminated areas will use cased mud-rotary methods. The borings will be performed utilizing a truck-mounted drill rig and will generate an approximately 6-inch diameter annulus. Sampling will be conducted using a 2-inch o. D., split-barrel sampler driven into the soil a distance of 18 or 24 inches by a 140-pound hammer falling inches.

Interstate 295 And South Capitol Street Washington Dc
Scb will perform 3 borings will extend to the depth of 35 feet, 5 borings to depths of feet, and 6 borings to feet unless refusal is encountered at shallower depths. The borings will be drilled utilizing 3. 25-inch hollow stem, continuous flight augers. Borings located in potentially contaminated areas will use cased mud-rotary methods. The borings will be performed utilizing a truck-mounted drill rig and will generate an approximately 6-inch diameter annulus. Sampling will be conducted using a 2-inch o. D., split-barrel sampler driven into the soil a distance of 18 or 24 inches by a 140-pound hammer falling inches.

Interstate 295 Southbound And Ramp To Howard Road Se Washington Dc
Scb will perform 2 borings will extend to the depths of 35, 1 boring to feet, and 4 borings to feet unless refusal is encountered at shallower depths. The borings will be drilled utilizing 3. 25-inch hollow stem, continuous flight augers. Borings located in potentially contaminated areas will use cased mud-rotary methods. The borings will be performed utilizing a truck-mounted drill rig and will generate an approximately 6-inch diameter annulus. Sampling will be conducted using a 2-inch o. D., split-barrel sampler driven into the soil a distance of 18 or 24 inches by a 140-pound hammer falling inches.

Interstate 295 Southbound Over Suitland Parkway Se Washington Dc
Scb will perform 7 borings to the depths of 35 feet, borings to feet, and 5 borings to feet unless refusal is encountered at shallower depths. The borings will be drilled utilizing 3. 25-inch hollow stem, continuous flight augers. Borings located in potentially contaminated areas will use cased mud-rotary methods. The borings will be performed utilizing a truck-mounted drill rig and will generate an approximately 6-inch diameter annulus. Sampling will be conducted using a 2-inch o. D., split-barrel sampler driven into the soil a distance of 18 or 24 inches by a 140-pound hammer falling inches.

South Capitol Street Sw And R Street Sw Washington Dc
Excavation; boring test pit (each addl)

Interstate 295 And South Capitol Street Washington Dc
Excavation; boring test pit (each addl), excavation; boring test pit (single)

South Capitol Street Southbound And Ramp From Robbins Road Sw Eastbound Washington Dc
Excavation; boring test pit (each addl)

Interstate 295 And South Capitol Street Washington Dc
Excavation; boring test pit (each addl)

Interstate 295 Southbound And Ramp To Howard Road Se Washington Dc
Excavation; boring test pit (each addl)

Interstate 295 Southbound Over Suitland Parkway Se Washington Dc
Excavation; boring test pit (each addl)

Interstate 295 Southbound Over Suitland Parkway Se Washington Dc
Scb will perform 7 borings to the depths of 35 feet, borings to feet, and 5 borings to feet unless refusal is encountered at shallower depths. The borings will be drilled utilizing 3. 25-inch hollow stem, continuous flight augers. Borings located in potentially contaminated areas will use cased mud-rotary methods. The borings will be performed utilizing a truck-mounted drill rig and will generate an approximately 6-inch diameter annulus. Sampling will be conducted using a 2-inch o. D., split-barrel sampler driven into the soil a distance of 18 or 24 inches by a 140-pound hammer falling inches.

South Capitol Street Sw And R Street Sw Washington Dc
Scb will perform 5 borings to the depth of feet and 2 borings to the depth of 115 feet unless refusal is encountered at shallower depths. The borings will be drilled utilizing 3. 25-inch hollow stem, continuous flight augers. Borings located in potentially contaminated areas will use cased mud-rotary methods. The borings will be performed utilizing a truck-mounted drill rig and will generate an approximately 6-inch diameter annulus. Sampling will be conducted using a 2-inch o. D., split-barrel sampler driven into the soil a distance of 18 or 24 inches by a 140-pound hammer falling inches.

South Capitol Street Southbound And Ramp From Robbins Road Sw Eastbound Washington Dc
Scb will perform borings to the depth of feet and 2 borings to the depth 115 feet unless refusal is encountered at shallower depths. The borings will be drilled utilizing 3. 25-inch hollow stem, continuous flight augers. Borings located in potentially contaminated areas will use cased mud-rotary methods. The borings will be performed utilizing a truck-mounted drill rig and will generate an approximately 6-inch diameter annulus. Sampling will be conducted using a 2-inch o. D., split-barrel sampler driven into the soil a distance of 18 or 24 inches by a 140-pound hammer falling inches.

Interstate 295 And South Capitol Street Washington Dc
Scb will perform 4 borings will extend to the depths of feet unless refusal is encountered at shallower depths. The borings will be drilled utilizing 3. 25-inch hollow stem, continuous flight augers. Borings located in potentially contaminated areas will use cased mud-rotary methods. The borings will be performed utilizing a truck-mounted drill rig and will generate an approximately 6-inch diameter annulus. Sampling will be conducted using a 2-inch o. D., split-barrel sampler driven into the soil a distance of 18 or 24 inches by a 140-pound hammer falling inches.

Interstate 295 And South Capitol Street Washington Dc
Scb will perform 3 borings will extend to the depth of 35 feet, 5 borings to depths of feet, and 6 borings to feet unless refusal is encountered at shallower depths. The borings will be drilled utilizing 3. 25-inch hollow stem, continuous flight augers. Borings located in potentially contaminated areas will use cased mud-rotary methods. The borings will be performed utilizing a truck-mounted drill rig and will generate an approximately 6-inch diameter annulus. Sampling will be conducted using a 2-inch o. D., split-barrel sampler driven into the soil a distance of 18 or 24 inches by a 140-pound hammer falling inches.

Interstate 295 Southbound And Ramp To Howard Road Se Washington Dc
Scb will perform 2 borings will extend to the depths of 35, 1 boring to feet, and 4 borings to feet unless refusal is encountered at shallower depths. The borings will be drilled utilizing 3. 25-inch hollow stem, continuous flight augers. Borings located in potentially contaminated areas will use cased mud-rotary methods. The borings will be performed utilizing a truck-mounted drill rig and will generate an approximately 6-inch diameter annulus. Sampling will be conducted using a 2-inch o. D., split-barrel sampler driven into the soil a distance of 18 or 24 inches by a 140-pound hammer falling inches.