Vcc - remove existing wood trim on the exterior to determine steel condition.

Building body (stuccoed masonry surfaces) - sherwin williams #6896 (sole- pale yellow)trim color... White (including millwork, windows, doors, fascia, underside of gallery decking, etc.)shutters... Dark green (french quarter green)iron work (cast iron gallery handrails, columns, frieze and trim, including gallery outriggers)... Dark green (typically called french quarter green)gallery deck surface... Benjamin moore copley grey, hc-104, or something equivalentall other preparation for painting including standard surface washing, repair and/or replacement of cracked or damaged plaster and any repair and/ or replacement of missing or damaged wood to match existing should be included as a part of the approved application. Spoke with applicant on 1. 21. 15 regarding decking/accent color. Indicated that this color is not appropriate for this particular building. Waiting for his decision on how to proceed.

Remove termite damaged wood detailing surrounding main entry doorrepair entry door surround to match existing in color, size, material, detail, profile and exposureremove all existing, unpermitted and/or unshielded light fixturesinstall seven (7) volt led top dog tommy lights to the ceiling and underside of the gallery centered over the window/door openings, per specifications and diagram stamped vcc approved 01/28/15fixtures shall be painted to match adjacent building surface. All conduit and wiring shall be placed along the inside corners of building surfaces as much as possible, such as along gallery/balcony purlins at the deck line, and painted to match the adjacent surfaces. All fixtures shall use lamps with the following criteria: 3000k color temperature, 80+ color rendering index, and 8 maximum lumens per bulbinstall three (3) fans on ceiling of second floor veranda, per diagram stamped vcc approved 01/28/15

Exterior stucco repair

Windows/doors.... White

Balcony deck repair

Interior demolition of former commercial space. Remove drywall furr-out, dropped ceiling and any abandoned on unused mechanical, plumbing and electrical. No use & occupancy. Plans to follow. No exterior work allowed under this permit.

Install shutters on existing windows and doors on the ground floor.

To remove existing wood trim above cut corner on both the dauphine and dumaine elevations to determine the full scope of work necessary for the removal of the cut corner (applied for separately and approved by the commission 11/04/15). Work as per drawing submitted 12/30/15 and stamped vcc approved 01/08/16.

Install shutters on existing windows and doors on the ground floor.

Note: previously approved plans amended as per plans submitted 06/03/16 and stamped vcc approved 06/07/16. The only approved change from previously reviewed plans is the use of stucco sills for the three new windows on the ground floor of the dauphine elevation to match adjacent sills on that elevation. Sill on dumaine elevation to be granite to match granite sills of neighboring 839 dumaine. Fill commercial clipped corner and install one new door and four new windows on the ground floor

Repair termite damage on either side of front door

To install one new ellijay 3-light outdoor hanging lantern per materials submitted 07/20/16 and stamped vcc approved 07/21/16. Fixture to be installed to the underside of the gallery centered over the new entry door opening fixture to be at least 9 above the sidewalk all wiring shall be placed in conduits all conduits shall be placed along the inside corners of building surfaces as much as possible, such as along gallery/balcony purlins at the deck line, and painted to match the adjacent surfaces. All fixtures shall use lamps with the following criteria: 3000k color temperature, 80+ color rendering index, and 600-8 lumens per bulb

Remove termite damaged wood detailing surrounding main entry doorrepair entry door surround to match existing in color, size, material, detail, profile and exposureremove all existing, unpermitted and or unshielded light fixturesinstall seven (7) volt led top dog tommy lights to the ceiling and underside of the gallery centered over the window door openings, per specifications and diagram stamped vcc approved 01 28 15fixtures shall be painted to match adjacent building surface. All conduit and wiring shall be placed along the inside corners of building surfaces as much as possible, such as along gallery balcony purlins at the deck line, and painted to match the adjacent surfaces. All fixtures shall use lamps with the following criteria: 3000k color temperature, 80+ color rendering index, and 8 maximum lumens per bulbinstall three (3) fans on ceiling of second floor veranda, per diagram stamped vcc approved 01 28 15

To remove existing wood trim above cut corner on both the dauphine and dumaine elevations to determine the full scope of work necessary for the removal of the cut corner (applied for separately and approved by the commission 11 04 15). Work as per drawing submitted 12 30 15 and stamped vcc approved 01 08 16.

Note: previously approved plans amended as per plans submitted 06 03 16 and stamped vcc approved 06 07 16. The only approved change from previously reviewed plans is the use of stucco sills for the three new windows on the ground floor of the dauphine elevation to match adjacent sills on that elevation. Sill on dumaine elevation to be granite to match granite sills of neighboring 839 dumaine. Fill commercial clipped corner and install one new door and four new windows on the ground floor

Windows doors.... White

To install one new ellijay 3-light outdoor hanging lantern per materials submitted 07 20 16 and stamped vcc approved 07 21 16. Fixture to be installed to the underside of the gallery centered over the new entry door opening fixture to be at least 9 above the sidewalk all wiring shall be placed in conduits all conduits shall be placed along the inside corners of building surfaces as much as possible, such as along gallery balcony purlins at the deck line, and painted to match the adjacent surfaces. All fixtures shall use lamps with the following criteria: 3000k color temperature, 80+ color rendering index, and 600-8 lumens per bulb

Building body (stuccoed masonry surfaces) - sherwin williams #6896 (sole- pale yellow)trim color... White (including millwork, windows, doors, fascia, underside of gallery decking, etc.)shutters... Dark green (french quarter green)iron work (cast iron gallery handrails, columns, frieze and trim, including gallery outriggers)... Dark green (typically called french quarter green)gallery deck surface... Benjamin moore copley grey, hc-104, or something equivalentall other preparation for painting including standard surface washing, repair and or replacement of cracked or damaged plaster and any repair and or replacement of missing or damaged wood to match existing should be included as a part of the approved application. Spoke with applicant on 1. 21. 15 regarding decking accent color. Indicated that this color is not appropriate for this particular building. Waiting for his decision on how to proceed.