1. Fabricate and install a double-sided wooden sign as follows, per application and materials received 7/8/13 and stamped vcc approved 8/16/13, and per change of use approved at vcc meeting on 8/7/13:2. Sign will be painted wood, measuring 21" x 15" with black background & green letters reading "afa"; under that, in white letters: "new york new orleans las vegas france". 3. Sign will be suspended by chains from iron outriggers on underside of second floor gallery, in front of shop window; bottom of sign will hang a minimum of 9 above sidewalk surface. Sign may not project more than 48 from the face of the building. Note: permit never picked up. (nga - 2. 3. 15)

Remove existing firefree shingle roof and install new slate roof

1. Fabricate and install double faced metal sign per application and drawings received on 2/4/13 and stamped vcc approved on 2/21/13. 2. Sign will be mounted by attaching metal backplate to brick wall immediately to the left of the shop door. 3. Sign will be mounted so that there is at least 9 of clearance between the bottom of the sign and the surface of the sidewalk below.

Remove existing fire free plus roofing material repair and/or replace underlayment as necessaryinstall new natural slate (grey/green), using copper nailsinstall copper gutters, flashing and ventsreinstall terra cotta ridge tilesnote: trash chutes are required for removal of debris from all roofs permit does not allow for cap flashing on parapet or surrounding wallstorch-applied roofing is not permitted in the vieux carr. 2016. 04. 05 - permit not picked up.

Blm312-vernon marcotte-415-2537-pd chk# 1118-whx5apt1,2,3 and 811 1&2

1. Fabricate and install double faced metal sign per application and drawings received on 2 4 13 and stamped vcc approved on 2 21 13. 2. Sign will be mounted by attaching metal backplate to brick wall immediately to the left of the shop door. 3. Sign will be mounted so that there is at least 9 of clearance between the bottom of the sign and the surface of the sidewalk below.

Remove existing fire free plus roofing material repair and or replace underlayment as necessaryinstall new natural slate (grey green), using copper nailsinstall copper gutters, flashing and ventsreinstall terra cotta ridge tilesnote: trash chutes are required for removal of debris from all roofs permit does not allow for cap flashing on parapet or surrounding wallstorch-applied roofing is not permitted in the vieux carr. 2016. 04. 05 - permit not picked up.

1. Fabricate and install a double-sided wooden sign as follows, per application and materials received 7 8 13 and stamped vcc approved 8 16 13, and per change of use approved at vcc meeting on 8 7 13:2. Sign will be painted wood, measuring 21" x 15" with black background & green letters reading "afa"; under that, in white letters: "new york new orleans las vegas france". 3. Sign will be suspended by chains from iron outriggers on underside of second floor gallery, in front of shop window; bottom of sign will hang a minimum of 9 above sidewalk surface. Sign may not project more than 48 from the face of the building. Note: permit never picked up. (nga - 2. 3. 15)

Replace existing sign for krewe

To install one (1) double-faced wood sign to read krewe new orleans eyewear per drawings submitted on 10 19 17 & stamped vcc approved 10 26 17 sign will measure: 24 w x 15 h x 1 thickness sign will hang perpendicular to the street, centered between the storefront door and shop window sign will hang from chains wrapped over existing outriggers sign will have a black background with white lettering no additional illumination or lighting is approvednote: all existing signs must be removed and no additional signs may be installed. The bottom of the sign shall be at least above the surface of the sidewalk beneath it. Signs shall not extend beyond 40" from the building face.