For selective interior demolition and for a partial change in occupancy to create a vacant commercial space on the first floor and two (2) dwelling units on the second floor of an existing two-story structure. Second floor to be sprinklered throughout. Separate permits required for mechanical, electrical, plumbing, and fire suppression systems.

Install backflow preventor (mixed use)the installation will comply with the philadelphia plumbing code 2004

Curb trap,main drain and fai pa20172790087 "self-certifications are no longer permitted" - "all excavations and plumbing trenches in excess of 5 feet in depth must have approved shoring in place at the time of inspection"

Restaurant and apartment: installing (5) amp 120v direct circuits - (2) 220v amp direct circuits - correcting wiring installed by others, 2nd fl. - removing old disgarded wiring - basement: installing (4) two-tube flouresent fixtures. (cc dist). (not a reno - fire alarm existing, no other work).

Electrical permit

Alteration: interior plumbing of a 2-story building with a vacant commercial space on the 1st floor and (2) dwelling units on the 2nd floor. The installation will comply with the philadephia plumbing code, 2004. A backflow prevention containment assembly is required per code section, p-806. 2. Separate permits are required for the 5" sewer lateral to the street main and the vacant commercial space on the 1st floor.

Remove stucco and repoint frt. Wall to convert to original finish. Replace 4 windows of bulk glass windows units for original store front, no change in size of openings. No new structural members

Initializing 3 amp 2 phase svs, (2) 2 phase disconnects, amp (2) 15 kva phase changers. Re-feeding (1) 2 amp panel, (1) amp panel, balancing existing equipment, new grounding and rod & bonding. (cc dist)

Exterior alterations as per plans. New windows and door. Stucco front 1st floor new awning.

For the installation of a new mechanical system to match alterations as issued under permit #645719. Work to include new appliances (installed in accordance with manufacturers specifications), registers diffusers, and all supplemental ductwork as shown in approved plans.