To perform repairs/replacement of roofing material and cimneys as per materials submitted 10/30/15 and stamped vcc approved 11/02/15. Work includes: install new genflex mil tpo material to blind gutter area around main building roof and to unrated flat roof area of courtyard infill. Remove existing roofing material from the bourbon elevation slope only of the main building repair and/or replace underlayment as necessary install new natural slate (grey/green), using copper nails on the bourbon elevation of the main building install/repair copper gutters, flashing and vents install/reinstall ceramic or concrete v-style or terra cotta ridge tiles metal cap-flashing on the parapets is not allowed repoint chimneys using mortar made using recipe below note: trash chutes are required for removal of debris from all roofs all work must conform to standard vcc policies & guidelines permit does not allow for cap flashing on parapet or surrounding wallstorch-applied roofing is not permitted in t

Replace one ten ton air handler and two five ton condensing units

Install exterior camera on our upstairs balcony. Remove exterior halogen lights that are not approved by vieux carre commission.

To retain one (1) bullet security cameras mounted to underside of second floor gallery overhang per cut sheet submitted 04/14/16 & stamped vcc approved 04/19/16. Cameras shall be painted white to match adjacent building surface. All wiring shall be placed in conduitsall conduits to be placed along the inside corners of building surfaces as much as possible, such as along gallery/balcony purlins at the deck line, and painted to match the adjacent surfaces. All cameras to be installed a minimum of 9-feet above the sidewalk and a maximum of 18-inches below the bottom of the balcony, gallery, porch ceiling, roof overhang, or soffit. Remove all existing, unpermitted and/or unshielded light fixturesnote: permit issued in response to violations. Work shall commence no less than days after permit is issued. Work must be completed no less than days after work begins. Owner will call vcc for final inspection upon completion of work. Penalty fees may apply because of improper or unauthorized work

To repair replace three (3) headers on the second floor of the bourbon st. Elevation to match existingall work as per materials submitted 10 06 16 and stamped vcc approved 10 13 16 all repair replacement work shall match existing in color, size, material, detail, profile and exposure. Failure to exactly match materials, details, profiles, exposures, or vcc mortar as specified in permit will result in a vcc violation and mandated repair of improper work. Note: permit issued in response to violations. Work shall commence no less than days after permit is issued. Work must be completed no less than days after work begins. Owner will call vcc for final inspection upon completion of work. Penalty fees may apply because of improper or unauthorized work. All work must conform to standard vcc policies & guidelines.

To perform exploratory demolition of wood portions of second floor headers of the bourbon elevation, per materials submitted 08 22 16 and stamped vcc approved 08 25 16. Note: application for remediation work to be made no later than days following the issuance of this permit. Note: permit issued in response to violations. Work shall commence no less than days after permit is issued. Work must be completed no less than days after work begins. Owner will call vcc for final inspection upon completion of work. Penalty fees may apply because of improper or unauthorized work.

To perform repairs replacement of roofing material and cimneys as per materials submitted 10 30 15 and stamped vcc approved 11 02 15. Work includes: install new genflex mil tpo material to blind gutter area around main building roof and to unrated flat roof area of courtyard infill. Remove existing roofing material from the bourbon elevation slope only of the main building repair and or replace underlayment as necessary install new natural slate (grey green), using copper nails on the bourbon elevation of the main building install repair copper gutters, flashing and vents install reinstall ceramic or concrete v-style or terra cotta ridge tiles metal cap-flashing on the parapets is not allowed repoint chimneys using mortar made using recipe below note: trash chutes are required for removal of debris from all roofs all work must conform to standard vcc policies & guidelines permit does not allow for cap flashing on parapet or surrounding wallstorch-applied roofing is not permitted in t

To retain one (1) bullet security cameras mounted to underside of second floor gallery overhang per cut sheet submitted 04 14 16 & stamped vcc approved 04 19 16. Cameras shall be painted white to match adjacent building surface. All wiring shall be placed in conduitsall conduits to be placed along the inside corners of building surfaces as much as possible, such as along gallery balcony purlins at the deck line, and painted to match the adjacent surfaces. All cameras to be installed a minimum of 9-feet above the sidewalk and a maximum of 18-inches below the bottom of the balcony, gallery, porch ceiling, roof overhang, or soffit. Remove all existing, unpermitted and or unshielded light fixturesnote: permit issued in response to violations. Work shall commence no less than days after permit is issued. Work must be completed no less than days after work begins. Owner will call vcc for final inspection upon completion of work. Penalty fees may apply because of improper or unauthorized work