Content | Date | Cost | Contractor Rank | Address | Contractor |
---|---|---|---|---|---|
Blm312-robert goodwin-328-8502-pd chk# 4348-a/c, waf Date: October 30, 2012 Permit type: General mechanical | Permit status: Certificate of completion | Completion date: December 17, 2012 | Expiration date: April 30, 2013 | Current use: Business use | Permit id: 12-29021-Mech | |||||
To replace seven (7) existing air-conditioning units on roof, with new units to match existing in size and location. Existing units are 21 years old, and new units are being installed for increased efficiency. New units to be tempstar tca& high efficiency 17 seer two-stage a/c with observer communicating control system, per materials and photos received and approved 10/24/12. Date: October 24, 2012 Value: $55,000 Permit type: Vcc general work | Permit status: Permit issued | Expiration date: April 24, 2013 | Current use: Single family | Permit id: 12-28341-Vcgen | |||||
Remove vegetation & repair stucco as needed to match existing with the following vcc approved stucco mix:stucco: base coat consists of 2 coats, doubled up work of 5/8" total thickness. Proportioned as follows: no greater than 1:12 part portland cement, to 3 parts lime, and 9 parts sand, 6 lbs./cubic yard hair or fiber, and enough water to form a workable mix. Finish coat is 1/4" in total thickness proportioned as follows: no more than 1 part portland cement, 3 parts lime, 9 parts sand, enough water to form a workable mix. Note: ratio of portland cement not to exceed 1:12. Date: July 7, 2014 Permit type: Vcc general work | Permit status: Permit finaled | Completion date: November 24, 2014 | Expiration date: January 11, 2015 | Current use: Business use | Permit id: 14-21590-Vcgen | |||||
Remove existing slate roofing material repair and/or replace underlayment as necessaryreinstall/install new natural slate (grey/green), using copper nailsinstall/repair copper gutters, flashing and ventsinstall/reinstall ceramic or concrete v-style or terra cotta ridge tilesmetal cap-flashing on the parapets is not allowednote:trash chutes are required for removal of debris from all roofsall work must conform to standard vcc policies & guidelinespermit does not allow for cap flashing on parapet or surrounding wallstorch-applied roofing is not permitted in the vieux carr. Date: April 10, 2014 Permit type: Vcc general work | Permit status: Permit issued | Expiration date: October 10, 2014 | Current use: Business use | Permit id: 14-11488-Vcgen | |||||
SCORE 88 Replace approximately broken or missing natural slates over all three roofs, to match existing. Remove slates along edge of parapet walls of main house, replace all underlayment in this area and replace all copper flashing and counter-flashing, seal, and reinstall slates. Remove slate from perimeter of two chimneys on main house, replace underlayment and flashing, and replace slates. Re-stucco both chimneys using an appropriate lime-based stucco mix. Replace in kind approximately 1 of copper box gutter on rear dependency; seal and solder appropriately. Permit type: Vcc general work | Permit status: Permit issued | Expiration date: November 24, 2013 | Current use: Multi-family | Permit id: 13-16342-Vcgen | |||||
To replace seven (7) existing air-conditioning units on roof, with new units to match existing in size and location. Existing units are 21 years old, and new units are being installed for increased efficiency. New units to be tempstar tca& high efficiency 17 seer two-stage a c with observer communicating control system, per materials and photos received and approved 10 24 12. Date: October 24, 2012 Value: $55,000 Permit type: Vcc general work | Permit status: Permit issued | Expiration date: April 24, 2013 | Current use: Single family | Permit id: 12-28341-Vcgen | |||||
Blm312-robert goodwin-328-8502-pd chk# 4348-a c, waf Date: October 30, 2012 Permit type: General mechanical | Permit status: Certificate of completion | Completion date: December 17, 2012 | Expiration date: April 30, 2013 | Current use: Business use | Permit id: 12-29021-Mech | |||||
Remove vegetation & repair stucco as needed to match existing with the following vcc approved stucco mix:stucco: base coat consists of 2 coats, doubled up work of 5 8" total thickness. Proportioned as follows: no greater than 1:12 part portland cement, to 3 parts lime, and 9 parts sand, 6 lbs. Cubic yard hair or fiber, and enough water to form a workable mix. Finish coat is 1 4" in total thickness proportioned as follows: no more than 1 part portland cement, 3 parts lime, 9 parts sand, enough water to form a workable mix. Note: ratio of portland cement not to exceed 1:12. Date: July 7, 2014 Permit type: Vcc general work | Permit status: Permit finaled | Completion date: November 24, 2014 | Expiration date: January 11, 2015 | Current use: Business use | Permit id: 14-21590-Vcgen | |||||
Remove existing slate roofing material repair and or replace underlayment as necessaryreinstall install new natural slate (grey green), using copper nailsinstall repair copper gutters, flashing and ventsinstall reinstall ceramic or concrete v-style or terra cotta ridge tilesmetal cap-flashing on the parapets is not allowednote:trash chutes are required for removal of debris from all roofsall work must conform to standard vcc policies & guidelinespermit does not allow for cap flashing on parapet or surrounding wallstorch-applied roofing is not permitted in the vieux carr. Date: April 10, 2014 Permit type: Vcc general work | Permit status: Permit issued | Expiration date: October 10, 2014 | Current use: Business use | Permit id: 14-11488-Vcgen | |||||
SCORE 88 Replace approximately broken or missing natural slates over all three roofs, to match existing. Remove slates along edge of parapet walls of main house, replace all underlayment in this area and replace all copper flashing and counter-flashing, seal, and reinstall slates. Remove slate from perimeter of two chimneys on main house, replace underlayment and flashing, and replace slates. Re-stucco both chimneys using an appropriate lime-based stucco mix. Replace in kind approximately 1 of copper box gutter on rear dependency; seal and solder appropriately. Permit type: Vcc general work | Permit status: Permit issued | Expiration date: November 24, 2013 | Current use: Multi-family | Permit id: 13-16342-Vcgen | |||||
Stucco walls.... Beige (lambswool, 2269, pratt and lambert), flat or eggshell finishtrim including doors, windows, transoms, frames, dormer face, balcony fascia and soffit boards.... White or off-white, semiglossshutters... Smoke stack, 315 (mt), semigloss, martin senour or equalrelocate wires and repaint to match the adjacent surface Date: March 2, 2017 Permit type: Vcc paint | Permit status: Permit issued | Expiration date: September 2, 2017 | Current use: Business use | Permit id: 17-07092-Vcpnt | |||||
To prepare ground floor of st. Louis elevation for painting by utilizing dumond chemicals peel away to remove elastomeric paint. To prepare the rest of the building for painting by washing using a low water pressure (4 psi max) and or sanding (rotary sanders cannot be used), making minor millwork and masonry repairs as necessary to match existing conditions (masonry mix must be soft, with maximum portland cement content not to exceed 1 part to 12) and to paint as follows to match existing conditions: stucco walls.... Beige (lambswool, 2269, pratt and lambert), flat or eggshell finishtrim including doors, windows, transoms, frames, dormer face, balcony fascia and soffit boards.... White or off-white, semiglossshutters... Smoke stack, 315 (mt), semigloss, martin senour or equalrelocate wires and repaint to match the adjacent surfacefailure to exactly match permit specified colors will result in a vcc violation and mandated repainting. This permit prohibits the application of the following ex Date: June 14, 2017 Permit type: Vcc paint | Permit status: Permit issued | Expiration date: December 15, 2017 | Current use: Business use | Permit id: 17-20946-Vcpnt |