-paint doors, windows, and trim tomatch existing (glc-27 parchement white) making minor millwork and masonry repairs as necessary to match existing conditions.

Install two (2) non-illuminated signs as per sketch and 13-05193-vcsgn.

Remove all existing, unpermitted and/or unshielded light fixtures install a total of four (4) remcraft lighting 1 series outdoor cylindrical bullet security spot light in the same locations of the current floodlights immediately above the columns with two (2) on chartres elevation and two (2) on iberville elevation all used to illuminate the existing hanging signs fixtures shall be painted to match adjacent building surface. All conduit and wiring shall be placed along the inside corners of building surfaces as much as possible and painted to match the adjacent surfaces. All fixtures shall use lamps with the following criteria: 3000k color temperature, 80+ color rendering index, and 800-12 lumens per bulbapplied for but not permitted - [adding a border to the existing signs as per attached drawing. The border will be like a frame around the existing signs and have exterior dimensions 46" tall and 48" wide. The frame will be 5" wide and painted black. The existing "cooking classes" sign

Tenant build-out of retail store as per plans and 13-05252-vcpnt.

To install intercom devices and signage on chartres and iberville elevations to comply with ada requirements, per application and materials received 06/18/13 as follows: two (2) small 6 x 4 signs to read for assistance entering store, please ring bell in bronze colored letters with black backgrounds, two (2) chamberlain model ntd2 wireless portable indoor/outdoor black intercom devices measuring approximately 3. 5 x 6. 5 x 2 thick. One (1) sign and one (1) intercom device are proposed to be mounted with adhesive tape to painted granite columns, adjacent to the entry doors to the shop space on both the chartres and iberville elevations, 48 above the sidewalk.

Installation & termination of 3 - #6 thwn copper conductors in new underground board conduits (by others) to obtain 1 volts from entergy vault to new wireless antenna poles, along with the grounding of poles.

-installation of two (2) signs, and one (1) sign bracket.-signs will read "crescent city cooks: cooking classes"

Remove all existing, unpermitted and or unshielded light fixtures install a total of four (4) remcraft lighting 1 series outdoor cylindrical bullet security spot light in the same locations of the current floodlights immediately above the columns with two (2) on chartres elevation and two (2) on iberville elevation all used to illuminate the existing hanging signs fixtures shall be painted to match adjacent building surface. All conduit and wiring shall be placed along the inside corners of building surfaces as much as possible and painted to match the adjacent surfaces. All fixtures shall use lamps with the following criteria: 3000k color temperature, 80+ color rendering index, and 800-12 lumens per bulbapplied for but not permitted - [adding a border to the existing signs as per attached drawing. The border will be like a frame around the existing signs and have exterior dimensions 46" tall and 48" wide. The frame will be 5" wide and painted black. The existing "cooking classes" sign

To install intercom devices and signage on chartres and iberville elevations to comply with ada requirements, per application and materials received 06 18 13 as follows: two (2) small 6 x 4 signs to read for assistance entering store, please ring bell in bronze colored letters with black backgrounds, two (2) chamberlain model ntd2 wireless portable indoor outdoor black intercom devices measuring approximately 3. 5 x 6. 5 x 2 thick. One (1) sign and one (1) intercom device are proposed to be mounted with adhesive tape to painted granite columns, adjacent to the entry doors to the shop space on both the chartres and iberville elevations, 48 above the sidewalk.