Install 400a service and wire throughout for outlets, switches, 1 lights and smokes. Carbons according to 2008 nec code.(multi family) cc district install fire alarm system throughout per nfpa 72

For the installation of an automatic fire suppression system in accordance with nfpa 13 in a four (4) story building to include new backflow prevention assembly and new 2-inch fire service line as per approved plans.

Alteration: interior plumbing for a 4-story, (4) dwelling unit bldg. The installation will comply with the philadelphia plumbing code, 2004. Pvc pipe materials are not permitted on this project per code sectionp-902. 5 & p-1102. 3. Separate permits are required for the 5" sewer lateral & 1-1 2" domestic water distribution service, to the street mains, as well as the 1-1 2" backflow prevention containment assembly.

For the demolition of existing garage, for the relocation of lot line to create two(2) lots ( lot# b and lot# c) from one(1) lot ( lot# a) from one(1) opa account ( 1736 green street). Size and location as shown in the application.

Install (4) hvac systems with ductwork. (multi-family) units not to visible from the public right of way. Approved by the phc.

For use as multi-family household living (four (4) units) in an existing attached structure.

For partial demolition of one story garage as per plans.

For a complete change in occupancy classification to create a four (4) family dwelling. Work to include interior non-bearing partitions and finishes. Separate permits required for mechanical, electrical, plumbing, and fire suppression systems (see bbs variance, case no. 27626). All asbestos to be treated & removed prior to commencement of work. All work to be performed in accordance with plans approved by philadelphia historical commission (dated 01. 11. 16).

Pa one call#2016-280-14327 replacement of 5" lateral, 1-1 2" main water line, house trap, fresh air inlet to a 3-sty, 4-family dwelling; self-certifications are no longer permitted; all excavations and plumbing trenches in excess of 5 feet in depth must have approved shoring in place at the time of inspection.