A total of four 4 to 6-inch diameter soil test borings will be drilled using 2. 25-inch continuous hollow stem flight augers. 2 borings will be used for geotechnical purposes, 1 auger probe will be drilled for infiltration testing, and one offset profile boring will be drilled for swm. The borings will extend to a maximum depth of feet below current site grades using a truck-mounted drill rig. The samples will be containerized for geotechnical classification and laboratory testing. After boring completion the boreholes will be grouted with bentonite slurry 2 lbs of bentonite to 1 gallon of water and the auger cuttings and all other investigation derived waste idw will be containerized in sealed drums per ddoe permit. See attached work plan.