Remove existing roofing material repair and/or replace underlayment as necessaryinstall new natural vermont slate (grey/green), using copper nailsinstall copper box gutters, flashing, and ventsreinstall ceramic or concrete v-style or terra cotta ridge tilesnote: trash chutes are required for removal of debris from all roofs. Permit does not allow for cap flashing on parapet or surrounding walls. Torch-applied roofing is not permitted in the vieux carr.

Replace existing slate roof with new natural vermont slate(semi weathering grey/green) with new copper flashings and copper box valley as per vcc permit #.

Walls: emerging taupe sw 6045 (to match existing), flat or satin finishwooden elements including doors, windows, frames, shop windows, fascia/soffit/outriggers of gallery: downy sw 7002 (to match existing), semiglossshutters: jasper (to match existing),semiglossironwork: caviar (to match existing)

-to replace six (6) existing hvac units on roof of brown-rated addition with six (6) new units per cut sheets submitted 11/04/13 & stamped vcc approved 11/13/13.-to repair iron vehicular gates as needed to match existing.-remove permanently the soffit boards on the underside of the 2nd and 3rd floor galleries in order to expose the framing to conform to vcc policy. -repair wooden electric panel boxes as needed to match existing.-to remove plywood around arches on orange rated addition and apply vcc approved stucco formula (below) as needed to match adjacent wall surface.-repair damaged roofing and flashing around skylight on brown-rated addition as needed to match existing. Stuccobase coat- consists of 2 coats, doubled up work of 5/8" total thickness, proportioned as follows:no greater than 1:12 part portland cement, to 3 parts lime, and 9 parts sand, 6 lbs./cubic yard hair or fiber, enough water to form a workable mix. Finish coat- 1/4" in total thickness proportioned as follows:no mor

1. Remove existing central hvac unit on right/rear corner of flat roof, and replace it with amana unit #gpc1330h41, measuring 66. 5"x34"x30". 2. New unit will be put in same location as old unit, on existing wooden platform; any necessary repairs to platform will be made in kind, to exactly match existing. 3. Existing ductwork on roof will remain in place, unchanged.

Remove replace damaged flashing,using copper. Remove replace counter flashing, remove and re set air conditioner condensers as per vcc approval

Remove replace damaged flashing,using copper. Remove replace counter flashing, remove and re set air conditioner condensers as per vcc approval

Remove existing roofing material repair and or replace underlayment as necessaryinstall new natural vermont slate (grey green), using copper nailsinstall copper box gutters, flashing, and ventsreinstall ceramic or concrete v-style or terra cotta ridge tilesnote: trash chutes are required for removal of debris from all roofs. Permit does not allow for cap flashing on parapet or surrounding walls. Torch-applied roofing is not permitted in the vieux carr.

Walls: emerging taupe sw 6045 (to match existing), flat or satin finishwooden elements including doors, windows, frames, shop windows, fascia soffit outriggers of gallery: downy sw 7002 (to match existing), semiglossshutters: jasper (to match existing),semiglossironwork: caviar (to match existing)

Replace existing slate roof with new natural vermont slate(semi weathering grey green) with new copper flashings and copper box valley as per vcc permit #.

1. Remove existing central hvac unit on right rear corner of flat roof, and replace it with amana unit #gpc1330h41, measuring 66. 5"x34"x30". 2. New unit will be put in same location as old unit, on existing wooden platform; any necessary repairs to platform will be made in kind, to exactly match existing. 3. Existing ductwork on roof will remain in place, unchanged.

-to replace six (6) existing hvac units on roof of brown-rated addition with six (6) new units per cut sheets submitted 11 04 13 & stamped vcc approved 11 13 13.-to repair iron vehicular gates as needed to match existing.-remove permanently the soffit boards on the underside of the 2nd and 3rd floor galleries in order to expose the framing to conform to vcc policy. -repair wooden electric panel boxes as needed to match existing.-to remove plywood around arches on orange rated addition and apply vcc approved stucco formula (below) as needed to match adjacent wall surface.-repair damaged roofing and flashing around skylight on brown-rated addition as needed to match existing. Stuccobase coat- consists of 2 coats, doubled up work of 5 8" total thickness, proportioned as follows:no greater than 1:12 part portland cement, to 3 parts lime, and 9 parts sand, 6 lbs. Cubic yard hair or fiber, enough water to form a workable mix. Finish coat- 1 4" in total thickness proportioned as follows:no mor