Remove and replace loose and deteriorated plaster on bourbon street and gov. Nichols elevations per vcc guidlines;exposed brick substrate to be repointed as necessary;old caulking to be removed from the frames of all openings, cleaned and replaced with sonneborn np-1 caulking. Mortar: no more than 1 part portland cement, to 3 parts lime, 9 parts sand, and enough water to form a workable mix. Prepackaged mixes are not permitted. The resulting mortar should range in color from white to beige but should not be grey in color. Stucco: base coat consists of 2 coats, doubled up work of 5/8" total thickness. Proportioned as follows: no greater than 1:12 part portland cement, to 3 parts lime, and 9 parts sand, 6 lbs./cubic yard hair or fiber, and enough water to form a workable mix. Finish coat is 1/4" in total thickness proportioned as follows: no more than 1 part portland cement, 3 parts lime, 9 parts sand, enough water to form a workable mix. The resulting mix should range in color from white

Reserve space in front of existing multi-family dwelling from 12/21/2015 to 12/27/2015.

Remove deteriorated floor boards, stringers, and fascia boards on three (3) balconies: one (1) on bourbon facade, and two (2) on st. Philip elevationinstall new 3"x4" beaded stringers, 5/4x4 s2s t&g floorboards, and 7/8" fascia with " bead, all as per vcc standard detail sheet no. 12 (attached). All repair/replacement work shall match existing in color, size, material, detail, profile and exposurepaint to match existing:wooden elements including balcony soffit (including outriggers) and fascia... Whiteiron balcony railing... Black

Construction zone walkthru scaffold on sidewalk in front of 1029 bourbon street for work on the facade of the building. No work on public right-of-way from february 24th to 28th, 2017 due to mardi gras.

Repair to bourbon street facade per materials approved by architectural committee 02 23 16 and stamped vcc approved 03 22 16, including: install new wood louvered shutters at third floor frieze windows, on clarks tip hinges, or equal. Shutters shall fit completely within existing openings when in closed position. Remove cracked, brittle and loose portland cement where possible, inspect existing masonry coursing behind cracked cement, replace recourse bricks as needed within 2-0" of cracked cement using vcc approved mortar formula, stucco facade as needed with vcc approved stucco formula, replace deteriorated wooden lintels as necessary, to match existing, install metal flashing above new decorative wooden cornices & behind new stucco, reinstall existing shutters, repair as needed. Mortar: no more than 1 part portland cement, to 3 parts lime, 9 parts sand, and enough water to form a workable mix. Prepackaged mixes are not permitted. The resulting mortar should range in color from white

Reserve space in front of existing multi-family dwelling from 12 21 2015 to 12 27 2015.

Remove deteriorated floor boards, stringers, and fascia boards on three (3) balconies: one (1) on bourbon facade, and two (2) on st. Philip elevationinstall new 3"x4" beaded stringers, 5 4x4 s2s t&g floorboards, and 7 8" fascia with " bead, all as per vcc standard detail sheet no. 12 (attached). All repair replacement work shall match existing in color, size, material, detail, profile and exposurepaint to match existing:wooden elements including balcony soffit (including outriggers) and fascia... Whiteiron balcony railing... Black

Remove and replace loose and deteriorated plaster on bourbon street and gov. Nichols elevations per vcc guidlines;exposed brick substrate to be repointed as necessary;old caulking to be removed from the frames of all openings, cleaned and replaced with sonneborn np-1 caulking. Mortar: no more than 1 part portland cement, to 3 parts lime, 9 parts sand, and enough water to form a workable mix. Prepackaged mixes are not permitted. The resulting mortar should range in color from white to beige but should not be grey in color. Stucco: base coat consists of 2 coats, doubled up work of 5 8" total thickness. Proportioned as follows: no greater than 1:12 part portland cement, to 3 parts lime, and 9 parts sand, 6 lbs. Cubic yard hair or fiber, and enough water to form a workable mix. Finish coat is 1 4" in total thickness proportioned as follows: no more than 1 part portland cement, 3 parts lime, 9 parts sand, enough water to form a workable mix. The resulting mix should range in color from white

Construction zone walkthru scaffold on sidewalk in front of 1029 bourbon street for work on the facade of the building. No work on public right-of-way from february 24th to 28th, 2017 due to mardi gras. Update: permit was effective from 1 9 17 - 2 20 17, and is now effective from 3 6 17 - 4 23 17.

Graffitti removalpaint fence to match existing