Level ii alterations with partial change of occupancy to create offices in current shell space on the second, third and fourth floors of building 3 as per approved plans and bbs variance 26877. Building 3 to be fully sprinklered per nfpa 13 and automatic smoke detection system complying with nfpa 72 must be installed per provisos of bbs variance 26877. Separate permits required for mep & fire suppression work

Restaurant upfit within existing shell building. New commercial kitchen with hoods, walk-in freezer cooler unit, bar, toilet rooms, dining areas. New exterior awnings. New roof top mechanical units.

Six accessory flat wall signs in addition to the previously approved zoning use permit a p 455907 & 518918 1) sign #25 illuminated channel letters 5-0" x 19-0" 2) sign # 28 11-0" x 25-0" with an illuminated 46 x 25-0", illuminates 2-6" x 35-0" &n 3-0" x 25-0" digital message board 3) sign #20, 30, 31 & 32 8-6" x 100" see a p 455907 for plan

Replacing loose bricks, capping and repointing on existing linear feet of parapet wall. No change in height or area.

Complete removal of the existing, rooftop billboard sign and structure in accordance with the enclosed drawing no. D75030-t307-1 dated 17nov15, prepared by tantala associates, llc. No change to existing height, area, bulk, use, parking, or accessory signage. Existing non-accessory sign (billboard sign n. 010703) is owned by clear channel outdoor advertising and was installed with zoning permit no. 199365 issued 16oct72, and may be used as removal credit for future non-accesory sign applications in accordance with 14-905(12)(b).

For the installation of one (1) rooftop unit with registers diffusers and associated ductwork on the fourth floor and one (1) heat pump with associated ductwork registers diffuers on the first floor, as per approved plans.

Amend permit #513101 update the occupancy of the concert venue and to revise floor layouts and to remove required vestibules, stage ventilation and second means of egress from first floor bar area as per approved plans and bbs variance no. 25767. Work to also include creation of new building 5 with type vb construction. Per bbs variance, fire watch must be provided during concert events, no stage effects other than lighting and sound, a 36" x 36" manual hatch must be provided in auditorium roof and pyrotechnical displays shall be prohibited. Separate permits required for all mep, fire suppression and sign work

Level ii alterations to create a bowling alley with restaurant bar and dining in vacant shell space in partial first floor and entire second floor of existing building 2 as per approved plans. Building to be fully sprinklered. See a p 513101 for shell construction. No exterior sign work on this permit, separate permit required. Separate permits required for mep & fire suppression work

Day t. C. O. Concert venue accessory spaces (buildings #1 & #5 )

One accessory roof top signs in addition to the previously approved zoning use permit (a p 455907 & 518918 1) sign # 42 erection of a 9 ft. Tall x 26-8" wide flat wall sign extending above the existing roof parapet and braced to the existing roof, consisting of one row of 3-10" tall x 26-8" wide illuminated channel letters and a 2-10" tall x 24-6" wide digital message board.

Temporary certificate of occupancy for front portion of distillery

Permit for the removal of (3) three, # 2 heating oil, underground storage tanks,

Erection and infill addition at 2nd floor1st floor use as concert venue, distillery manufacturing, distillery tasting room, bowling restaurant, restaurant, retail and common bldg uses. 2nd floor use as concert venue, distillery office, bowling alley lanes, admin office and common bldg uses. 3rd and 4th floor uses as distillery offices. Erection of multiple signs, out door bicycle parking spaces, 2 fully enclosed loading spaces, information kiosk, out door planters.

For level 2 alteration to existing tenant space as per approved plans. Separate permits required for mechanical, electrical, plumbing and fire suppression work.

Day t. C. O.

For the erection of two roof top signs (signs and 41) accessory to an assembly occupancy. All work to be done per approved plans. If field condition vary contact structural engineer prior to the start of any work. Separate permits required for all other work.

To amend permit # 641745 to correct the permit wording for the erection of one accessory roof sign (12-3"x 26 - sign # 42) as identified on the plan associated with a p # 455907 with all previously approved uses.

Three accessory roof top signs in addition to the previously approved zoning use permit a p 455907 & 518918 1) sign # 33 4-0" x 36-0" with five lines each 1-6" high 2) sign # 14-0" x 48-0" digital 3) sign #41 14-0" x 48-0" digital